New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pembroke Pines pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
PGT Sliding & Patio Doors: The Pembroke Pines Owner’s Guide
PGT sliding and patio door repair in Pembroke Pines typically runs $340-$890 for roller, track, and handle hardware replacement, while full panel or frame section replacement ranges $1,200-$2,800 depending on size, impact rating, and glazing specification. We stock PGT-compatible rollers, tandem carriers, and locking hardware for same-day field replacement on most series, and we carry full panel inventory for the 7700 and 7800 series in common Pembroke Pines rough-opening sizes. Most owners discover the failure when the door sticks in the summer humidity, pops off track during a storm, or when the lock no longer engages flush after years of frame settlement in our sandy Broward soil.
Which PGT Models This Applies To
PGT marks series and manufacturing data on a permanent label inside the door frame edge or on the glass corner logo. The four series we see most in Pembroke Pines are the 7700 (vinyl-frame sliding door, non-impact), 7800 (vinyl-frame impact-rated), 5400 (aluminum-frame non-impact), and 5500 (aluminum-frame impact). The roller assemblies differ materially: 7700/7800 use a tandem roller with a 1-1/4 inch stainless steel wheel on a polymer bracket, while 5400/5500 use a heavier adjustable carriage with a 1-1/2 inch brass or steel wheel. We have learned to check the wheel diameter before ordering; a 1-1/4 inch roller forced into a 5400 track will bind and chew the rail in six months.
OEM PGT rollers and locks carry the PGT part number and match the original specification exactly. We also source quality aftermarket equivalents from C.R. Laurence and Truth Hardware where the OEM lead time exceeds our standard. For impact-rated doors, we do not substitute non-OEM on the glazing bead or interlock weatherstrip; the Miami-Dade HVHZ certification depends on the exact gasket compression the original design specified. We will show you the part in hand and the part number on the invoice so the specification is documented.
Before
AfterSigns Your PGT Sliding & Patio Door Is Failing
- The door requires shoulder weight to move. This usually means the tandem rollers have flattened or the axle bushings have worn oval. In Pembroke Pines, the combination of salt air and summer humidity accelerates bearing corrosion; we see this most often on east-facing doors within three miles of the coast.
- The panel jumps the track or scrapes the sill. The roller height adjustment has bottomed out, or the track rail itself has worn a groove. Track replacement is a frame-level repair; roller-only replacement will not fix a deformed stainless rail.
- Lock tongue does not throw fully, or the handle spins. The mortise lock body has cracked at the cam, or the spindle has worn where it meets the lever. PGT uses a specific 45-degree mortise throw on most series; a generic replacement will not align with the keeper.
- Visible daylight or water at the panel interlock. The interlock weatherstrip has compressed or the brush seal has detached. On impact-rated units, this is also a pressure-seal failure; the door may still lock but will not meet the design pressure rating.
- Condensation between glass panes. The insulated glass unit (IGU) seal has failed. PGT IGUs are sized to the nearest 1/8 inch; ordering by rough opening rather than the etched glass dimension results in a unit that will not fit the vinyl or aluminum glazing pocket.
Replacement Cost & What’s Included
| Component | Typical Range (Installed) | Notes |
|---|---|---|
| Roller / tandem assembly (pair) | $340-$520 | Includes track cleaning, height adjustment, operation test |
| Mortise lock and handle set | $280-$440 | OEM PGT or spec-matched equivalent; keyed alike option available |
| Track / sill cap replacement | $480-$720 | Aluminum or stainless rail; includes sealant and drainage check |
| IGU replacement (per panel) | $620-$1,100 | Impact-rated Low-E, argon-filled; sized to etched glass dimension |
| Full panel replacement (single) | $1,200-$2,800 | Depends on size, impact rating, and glass specification |
What drives the range: wheel material (stainless vs. polymer), whether the track requires section replacement, and whether the door is impact-rated (impact hardware costs more and must match the original Miami-Dade notice of acceptance). Every quote we write in Pembroke Pines is based on a measured survey you keep; the price on that document is the price on the invoice. Haven Clause 1. Our 365-Day Done Right Promise covers the installation and the hardware function; if the door does not roll, lock, or seal as specified, we return and correct it.
DIY or Call Us?
An owner can safely inspect the roller condition by lifting the panel slightly from the interior side and checking for wheel flat spots or rust streaks on the track. You can also photograph the frame label and the etched glass code for reference. What goes wrong: the panel on a full-size PGT sliding door weighs 80-140 pounds depending on glass thickness, and the tandem roller bracket is under spring tension. Removing the panel without proper support risks frame damage, personal injury, or a cracked IGU. We do not recommend homeowner panel removal on impact-rated units; the interlock geometry is precise, and reassembly without the correct shimming changes the pressure rating. If you have the part number and want to verify compatibility, call us at (754) 219-8346. We will review it against the series specification at no charge.
FAQs
Seven to twelve years is typical here, shorter on coastal properties where salt air accelerates bearing corrosion. East-facing doors in neighborhoods like Pembroke Falls often show wear at five years. Call (754) 219-8346 for an exact quote on replacement - estimates are free.
Minor rail deformation can sometimes be dressed with a track tool, but a grooved or cracked stainless rail requires section replacement. We assess this during the measured survey and document the condition with photos you receive. Call (754) 219-8346 to schedule.
Most hardware replacements require 90-150 minutes on site, assuming the parts are in stock and the frame is square. Full panel replacement is a full day. We give you a written time estimate with the price before any work starts.
We carry rollers, tandem assemblies, mortise locks, and handle sets for the 7700, 7800, 5400, and 5500 series on every Pembroke Pines service vehicle. Full panels and IGUs are ordered to the measured dimension; we do not guess on glass size. Call (754) 219-8346 to schedule your free estimate.
Sightline Windows & Doors Pembroke Pines is independently owned and operated and is not affiliated with PGT Industries. We are a verified service provider for PGT, CGI, CWS, and ES Windows product lines.
Measure it right the first time. Everything else follows from that. Sonia Raman built our process on that principle since founding Sightline in 2012, and her crew has applied it across thousands of openings in Broward County - including the tight rough-opening assessments that keep our Pembroke Pines jobs on schedule and our material waste low.
Call (754) 219-8346 to schedule your free estimate. We will bring the measured survey, the written price, and the documented photo record. Haven Clause 1, 3, and 4.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pembroke Pines at Sightline Windows & Doors Pembroke Pines, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pembroke Pines
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pembroke Pines Services
