New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pembroke Pines pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Therma-Tru Door Installation: The Pembroke Pines Owner’s Guide
Therma-Tru door installation in Pembroke Pines typically runs $1,800-$4,200 for a complete entry system replacement, depending on whether you’re keeping the existing frame or replacing the full rough opening. We stock Therma-Tru-compatible components for same-day repair of most Classic-Craft, Smooth-Star, and Fiber-Classic series units, and we carry the complete line through our verified distributor. Most homeowners in Pembroke Pines discover their Therma-Tru door is failing when the fiberglass skin delaminates near the bottom rail, the composite stiles swell after a driving rain, or the multipoint lockset no longer draws the door tight against the weatherstrip - all accelerated by South Florida’s UV load and the near-daily moisture cycle we see west of I-75.
Which Therma-Tru Models This Applies To
Therma-Tru organizes its residential entry line into three primary series we install regularly in Pembroke Pines. Classic-Craft uses a hardwood edge construction with a high-definition emboss; Smooth-Star is the paintable fiberglass slab with a smoother surface profile; Fiber-Classic was the original fiberglass entry door and remains common in homes built between 2005 and 2015 across Broward County. Each series uses different stile widths, corner construction, and threshold assemblies, so the replacement part must match the original spec exactly.
To identify your unit, check the hinge-side edge for a stamped date code and series mark, or remove the interior trim to find the paper label Therma-Tru affixes to the top rail. The critical measurement is the stile width: Classic-Craft uses a 4-9/16 inch jamb depth as standard, but we’ve pulled units in Pembroke Falls where the original builder spec’d 6-9/16 for a 2×6 wall and never noted it. OEM parts from Therma-Tru guarantee exact fit; quality aftermarket equivalents exist for thresholds, weatherstrip kits, and multipoint hardware, but we do not recommend aftermarket for the composite stile itself - the density spec varies, and a mismatch will telegraph through the fiberglass skin within two seasons. Sightline Windows & Doors Pembroke Pines is an independent service provider; we are not affiliated with Therma-Tru, though we source factory-direct through our verified distributor.
Before
AfterSigns Your Therma-Tru Door Installation Is Failing
- Bottom rail swelling or delamination. The fiberglass skin separates from the composite core, usually where the threshold meets the door bottom. In Pembroke Pines, this happens when the weep holes clog with pollen and standing water wicks into the stile end grain. The door becomes harder to close and the sweep compresses unevenly.
- Multipoint lockset misalignment. The hooks or bolts no longer seat cleanly in the frame keepers. This is often frame settlement, not hardware failure - but the lockset takes the stress and the internal gearbox strips. You’ll feel resistance at the handle and hear metal grinding before the mechanism fails entirely.
- Threshold cap cracking or sagging. The adjustable aluminum cap fatigues from foot traffic and thermal cycling. Once the seal between cap and sub-threshold breaks, water runs under the sill plate and into the subfloor. We find this most often on west-facing doors in Pembroke Pines, where afternoon sun drives surface temperatures past 140°F.
- Weatherstrip compression set. The bulb or fin seal no longer rebounds after the door closes. Air leakage around the perimeter follows, and your AC runtime increases. The Q-Lon foam gasket Therma-Tru uses in pre-2018 units is particularly prone to this in high-ozone environments.
- Daylight visible at the hinge jamb. The hinge screws have worked loose from the jamb, or the composite stile has compressed under the hinge plate. The door drops slightly, binding at the header or striking the threshold. Left unaddressed, the corner seal fails and water intrusion follows.
Replacement Cost & What’s Included
| Scope | Price Range (Pembroke Pines) | What’s Included |
|---|---|---|
| Threshold cap replacement | $340-$580 | OEM cap, seal kit, sub-sill inspection, re-alignment |
| Weatherstrip kit (full perimeter) | $280-$460 | Q-Lon or silicone bulb replacement, jamb prep, tested seal |
| Multipoint lockset replacement | $520-$890 | OEM hardware, frame keeper adjustment, strike alignment |
| Complete slab replacement (existing frame) | $1,800-$2,800 | New Therma-Tru slab, hinges, hardware transfer, seal verification |
| Full entry system (frame, slab, hardware) | $3,200-$4,200 | Complete rough-opening assessment, new frame assembly, insulation, trim |
The range depends on three factors we document in your measured survey: whether the existing frame is square within 1/8 inch, whether the subfloor under the threshold is sound, and whether the original installation used proper flashing tape at the sill. Every quote we write in Pembroke Pines is itemized by line - parts, labor, disposal - and the document you sign is the document we invoice against. No change orders. The 365-Day Done Right Promise covers the installation; OEM hardware carries its own factory warranty, which we register at completion.
DIY or Call Us?
An owner can safely inspect their Therma-Tru door with a flashlight and a tape measure. Check the weep holes for blockage. Verify the threshold cap sits level with a 4-foot level. Note any daylight at the corners. These observations help us diagnose before we arrive, and we welcome them.
Where DIY goes wrong is in the adjustment of a multipoint lockset or the removal of a threshold integrated with the frame. The lockset gearbox contains hardened steel components under spring tension; improper disassembly can launch internal parts, and the alignment of three separate locking points requires a plumb frame and a square slab. Threshold replacement on a Therma-Tru unit often involves cutting sealant bonds and resetting the sill pan - get the pitch wrong, and water runs toward the house. For these, we recommend a trained technician. Call (754) 219-8346 to schedule your free estimate; we’ll bring the measured survey, the written price, and the correct parts for your series and year.
FAQs
Fifteen to twenty-five years for the fiberglass slab itself, though the weatherstrip, threshold cap, and lockset typically need attention at 8-12 years due to UV exposure and salt air. West-facing installations in Pembroke Pines, particularly without a covered entry, tend toward the shorter end of that range. Call (754) 219-8346 for an exact assessment - estimates are free.
Yes, if the composite stile and rail structure is sound. Delamination limited to the fiberglass skin can sometimes be addressed; threshold caps, weatherstrip, and hardware are designed as serviceable components. Once the stile core swells or the corner joints fail, replacement is the only lasting fix. We document the distinction with frame readings and photo evidence before quoting either path.
Four to six hours for a slab replacement in an existing square frame; a full entry system with frame replacement typically requires one full day, with a return visit for trim if interior finishes are involved. We schedule arrival times, not windows - Haven Clause 2 - and we leave a documented photo record of the completed seal test.
We carry thresholds, weatherstrip kits, and multipoint hardware for Classic-Craft, Smooth-Star, and Fiber-Classic series on every Pembroke Pines service vehicle. Complete slabs and frame assemblies are ordered factory-direct after the measured survey confirms dimensions and swing - usually two business days for standard sizes, longer for custom height or width. The survey document you keep becomes the order spec; no remeasure, no discrepancy.
Sonia Raman grew up in Los Angeles and learned the glazing trade at Los Angeles Trade-Technical College, where she spent two years in the building construction technology program before moving into field work full-time. Her crew has worked steadily across Pembroke Pines, including projects in the Pembroke Falls neighborhood where hurricane-rated impact glass has replaced a lot of older single-pane aluminum units. She is known specifically for tight rough-opening assessments: the kind of careful pre-order measuring that keeps material waste low and installation days on schedule. Measure it right the first time. Everything else follows from that.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pembroke Pines at Sightline Windows & Doors Pembroke Pines, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pembroke Pines
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pembroke Pines Services
