New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pembroke Pines pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CWS Sliding & Patio Doors: The Pembroke Pines Owner’s Guide
We stock and install CWS-compatible sliding and patio door systems in Pembroke Pines, with typical installed pricing from $1,850 for a standard 6-foot vinyl slider to $4,200 for a 12-foot impact-rated multi-panel unit. Most CWS hardware and roller assemblies are on our trucks, and we can usually inspect, measure, and quote same-day. Most Pembroke Pines owners first notice the problem when the door sticks in the track during summer humidity, or when the rollers grind audibly after a few years of salt-air exposure near the Everglades.
Which CWS Models This Applies To
CWS produces several sliding and patio door series, and the parts are not interchangeable across lines. The Series 8000 vinyl sliding door uses a 1-1/4 inch tandem roller with a stamped steel housing, while the Series 9000 aluminum impact-rated slider runs a 2-inch stainless steel ball-bearing roller rated for 150-pound panels. The CWS Estate Collection multi-slide uses a proprietary bottom-track guide system that CWS sources from a single OEM in Doral; aftermarket equivalents exist but we have found the guide geometry varies by 3/16 inch, enough to cause binding.
To identify your model, check the etched code in the glass corner (usually the interior lower right) or the sticker on the frame edge behind the operating panel. The label will read “CWS-8K,” “CWS-9K,” or “CWS-EST” followed by a date code. We carry OEM CWS rollers and weatherstrip for the 8000 and 9000 series, plus a tested aftermarket roller for the 8000 that matches the 250-pound load rating at roughly 60 percent of OEM cost. For Estate Collection track hardware, we order OEM; the lead time is typically four business days from CWS’s Miami-Dade distribution center.
Sightline Windows & Doors Pembroke Pines is an independent service provider, not affiliated with CWS.
Before
AfterSigns Your CWS Sliding or Patio Door Is Failing
- The panel drags or requires shoulder force to move. This usually means the tandem rollers have flattened or the axle bearings have seized. In Pembroke Pines, we see this accelerate when irrigation spray hits the track repeatedly; the hard water deposits cake the roller axles.
- A grinding or popping sound from the bottom track. The roller housing has cracked or a ball bearing has disintegrated. Once you hear metal-on-metal, the track itself is being scored and will need replacement if you wait.
- Visible daylight or water intrusion at the sill. The compression weatherstrip has hardened or the sill cap seal has separated. Florida UV breaks down EPDM rubber in four to six years; silicone bulb seals last longer but compress permanently.
- The lock thumbturn spins without engaging the keeper. The mortise lock mechanism has worn cam lobes, or the keeper has shifted due to frame settlement. We check this with a 2-foot level on the jamb; anything past 1/8 inch out of plumb means the frame needs adjustment, not just a new lock.
- Condensation between the glass panes. The insulated glass unit (IGU) seal has failed. CWS uses a dual-seal system; when the primary PIB seal degrades, argon escapes and moisture enters. This cannot be repaired; the IGU gets fabricated to measured size and swapped.
Replacement Cost & What’s Included
| Component | Price Range (Installed) | Notes |
|---|---|---|
| CWS 8000 series roller assembly (pair) | $180 - $260 | OEM or tested aftermarket; includes track cleaning and alignment check |
| CWS 9000 impact roller assembly (pair) | $320 - $440 | Stainless steel, 150-lb rated; heavier panel requires two technicians |
| Standard weatherstrip replacement (full perimeter) | $240 - $380 | EPDM or silicone bulb; price varies by door size |
| Mortise lock/keeper set | $160 - $220 | Includes jamb plumb check and keeper repositioning |
| IGU replacement (standard 6 ft slider) | $580 - $780 | Measured, fabricated, installed; Low-E coating matched |
| Full CWS 8000 door replacement (standard 6 ft) | $1,850 - $2,400 | Impact-rated option adds $600 - $900 |
| Full CWS 9000 impact door replacement (8 ft) | $3,200 - $4,200 | Includes permit, inspection, and photo documentation |
What moves the number: panel width (wider = heavier hardware), impact rating requirements for your Pembroke Pines zoning, and whether the existing frame is square. We measure every opening with a laser level and record the readings; if the rough opening is out of square by more than 1/4 inch, we quote the frame adjustment separately before ordering. No change orders after that point. The 365-Day Done Right Promise covers all labor; hardware carries the manufacturer’s warranty, which we register for you and document in your file.
DIY or Call Us?
An owner can safely inspect the track for debris, vacuum the sill, and test the lock with the door closed to see if the cam engages. What we do not recommend: removing a CWS impact-rated panel solo. A 9-foot Series 9000 panel weighs 180 to 220 pounds, and the roller retention screws are under spring tension; if the panel tips, the glass is laminated but the frame can warp, and a finger or foot under a dropping panel is an ER visit. We have also seen homeowners force a seized roller with a pry bar and crack the vinyl jamb, turning a $220 roller job into a $2,000 frame replacement.
If the door is sticking, the lock is failing, or you see moisture between the panes, call (754) 219-8346. We will measure, quote in writing, and if you approve, schedule the work. Measure it right the first time. Everything else follows from that.
FAQs
In coastal Broward County, expect eight to twelve years from standard rollers and twelve to fifteen from stainless steel impact-rated units, assuming the track stays clean and irrigation spray is diverted. Salt air and hard water are the accelerants; we have replaced 8000-series rollers in Pembroke Falls at six years where the track sat in daily sprinkler overspray. Call (754) 219-8346 for an exact quote on replacement - estimates are free.
Sometimes. A dry track can be cleaned and lubricated with silicone spray; a slightly misaligned keeper can be shimmed. But a seized roller, cracked housing, or failed IGU seal requires physical replacement; there is no adhesive or adjustment that restores function. We will tell you which category yours falls into after inspection, and we will show you the worn part before quoting. Call (754) 219-8346 to schedule.
A standard roller replacement on an 8000 or 9000 series takes ninety minutes to two hours for our two-person crew, including removal, track cleaning, reinstallation, and operational testing. An IGU replacement requires a return visit after fabrication, typically five to seven business days. We schedule both visits at the initial quote so you are not chasing us for a callback. Call (754) 219-8346 to book.
We carry 8000 and 9000 series rollers, weatherstrip profiles, and mortise locks on every Pembroke Pines service vehicle. Estate Collection track hardware and custom-size IGUs are ordered to measured spec; we do not guess on dimensions. Every part is cross-referenced to the CWS label code before we leave the warehouse. Call (754) 219-8346 and we will confirm stock against your model number before dispatching.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pembroke Pines at Sightline Windows & Doors Pembroke Pines, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pembroke Pines
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pembroke Pines Services
