New windows and doors improve comfort, cut energy bills and add long-term value to your home. Sightline Windows & Doors Pembroke Pines pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
1. Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
2. Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
3. Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line Florida homeowners arrive naming - the most Miami-Dade certifications in the industry$$$
- More Miami-Dade NOA certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe Florida value pick$$
- Vinyl systems built in Florida for Florida codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Miami-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
CGI Impact Windows & Doors in Pembroke Pines: What to Know First
We install and service CGI impact windows and doors in Pembroke Pines as an independent CGI service provider. Most CGI jobs we handle run from $320 for a single-hung sash replacement to $4,800 for a full-frame sliding door install, and we put that range in writing before any work starts. Call (754) 219-8346 to schedule your free measured survey.
This page is for homeowners in Pembroke Pines who already have CGI products or are considering them and want a technician who knows the difference between a Series 375 and a Series 575 frame profile without reading the label twice. We work across the city, including in Pembroke Falls and the older developments off Sheridan Street where original CGI installations from the mid-2000s are showing their age.
How CGI Products Fail - and How We Fix Them
- Series 375 single-hung: tilt-latch fatigue in coastal humidity. The nylon tilt-latch tabs dry out faster in Pembroke Pines than inland Florida because of salt air penetration through the weep system. We see this most in east-side homes near the C.B. Smith Park corridor. We replace with glass-reinforced nylon OEM latches and reseat the sash balance shoes so the tilt mechanism doesn’t bind on reinstallation.
- Series 575 horizontal roller: corroded stainless track at the sill. The 575’s heavier sash weight concentrates load on the rear track wheels, and when the sill track corrodes, the sash drops and chews the TPV weatherstrip. We measure track wear with a feeler gauge and replace the track insert rather than the full frame when the jamb is still square. Saves about $1,200 over full replacement on a typical 72-inch opening.
- Impact-rated laminated glass: interlayer delamination at the edge. CGI’s laminated impact glass uses a .090 PVB interlayer that can separate at the perimeter if the glazing pocket retains water. This shows as a milky haze you can only see at certain angles. We don’t reglaze these; we order replacement IGUs from the same fabricator CGI uses and document the lot number for warranty purposes.
- Sentinel by CGI (discontinued line): proprietary roller assembly NLA. The Sentinel series used a 7/8-inch axle roller that CGI no longer stocks. We’ve machined adapter brackets to accept the CWS equivalent roller, which runs on the same 11/16-inch rail height. We document this modification in the photo record so future techs know what they’re looking at.
- Fixed picture window: frame twist from improper shim spacing at original install. CGI’s extruded frame is stiff but not forgiving. When the original installer shimmed only at the corners on a wide opening, the center sill bows and the glass stresses. We pull the sash, straighten with a come-along and hardwood block, and reinstall with mid-span shims at 24-inch centers. Measure it right the first time. Everything else follows from that.
Before
AfterOur CGI Impact Windows & Doors Process
- 1
Measured survey. Sonia Raman or a verified crew member records rough opening dimensions, frame squareness, and existing glazing specs. You keep the survey sheet.
- 2
Diagnostics with photo documentation. We photograph the failure point, the frame label, and any warranty markings. This becomes evidence under Haven Clause 4.
- 3
Parts decision: OEM or verified equivalent. For current CGI lines, we quote OEM parts with lead times. For discontinued lines like Sentinel, we present the machined alternative with a written explanation of the modification.
- 4
Written scope and price. Haven Clause 1: the quote matches the survey document exactly. No line item appears without your initials.
- 5
Installation and live test. We cycle the sash 20 times, check the lock engagement depth, and verify the weep system drains to the exterior.
- 6
Photo record and 365-Day Done Right Promise. You receive dated installation photos and a written warranty under the Haven Standard. If it’s not done right, we make it right.
What CGI Impact Windows & Doors Costs in Pembroke Pines
These are the ranges we write on our estimates for typical CGI work in Pembroke Pines:
- Single-hung sash replacement (Series 375/575): $320-$580
- Horizontal roller sash and track service: $680-$1,400
- Laminated IGU replacement in existing frame: $890-$1,650
- Full-frame single-hung replacement: $1,800-$2,600
- Full-frame sliding door replacement: $3,200-$4,800
What moves the price: frame condition (square and plumb saves labor), stucco repair scope, and whether the original install used proper flashing integration. Second-story work adds $180-$240 for scaffolding. Call (754) 219-8346 for an exact quote - estimates are free, and we review competitor written estimates at no charge.
Why Pembroke Pines Homeowners Call Sightline Windows & Doors Pembroke Pines for CGI Work
We are independently owned and operated under the Haven Standard, not a franchise network. Our technicians are background-checked, uniformed, and arrive with license numbers visible. We carry eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - so when a CGI line is backordered or discontinued, we can specify an equivalent performance tier from another verified source rather than leave you waiting.
The 365-Day Done Right Promise is stamped on every job, not offered as a courtesy. Live phone coverage is available 24/7. Every one of the 18,000+ openings we’ve touched since 2012 left with a written price before work started and a documented photo record when finished.
FAQs
No, if the repair uses OEM parts and documented procedures. We keep the fabricator lot numbers and install photos so any future warranty claim has a paper trail. Call (754) 219-8346 if you’ve received a denial letter and want a free second opinion.
Current-series CGI parts typically ship in 5-10 business days. Discontinued lines like Sentinel require machined equivalents or aftermarket adaptation, which we fabricate in-house and install within 2-3 weeks. We tell you the lead time in writing before you commit.
Repair makes sense when the frame is square, the glazing pocket is dry, and the failure is isolated to hardware or a single sash. Full replacement is the better value when you have multiple failure points, frame corrosion, or the original install lacked proper flashing. We show you both numbers and let the math decide.
Yes. We document the existing product label, match the finish and grid pattern for ARC submissions, and provide the photo record the HOA often requires for final approval. We’ve completed dozens of units in Pembroke Pines HOA communities.
We cross-reference the original frame dimensions against current CGI lines and, when necessary, against PGT, CWS, or ES Windows equivalents with the same DP rating and sightline dimensions. You receive a written comparison of the options before ordering.
Written by Sonia Raman, Owner, Sightline Windows & Doors Pembroke Pines at Sightline Windows & Doors Pembroke Pines, serving Pembroke Pines and nearby areas.
Six Reasons Homeowners Choose Sightline Windows & Doors Pembroke Pines
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Sightline Windows & Doors Pembroke Pines Services
